FAQ
Bluetooth
Bluetooth Compatibility
Connect Bluetooth at the Computer (Windows)
Connect Bluetooth at the Handy, Tablet, etc. (Android)
Connect Bluetooth by Windows CE/Apple and the mobile phone
Driver and Bluetooth
Cable and Accessories
Firmware
GNSS Receiver
Interface and Driver
News
Software
Flight Planner 5.6 von ifos GmbH
Google Earth Pro
GPS-Information (Test and Check)
MTK MiniGPS (Test und Check)
NL-121X oder 122X Sportuhren
NL-456DL und NL-457DL mit TimeMachineX
SIRFDemo (GPS protocols)
uCenter
Compatibility Mode for ublox
uBlox and Change the Baudrate
uBlox-Center A-GPS
ublox-Center Compatibility Mode since ublox 6
uBlox-Center Egnos
uBlox-Center GLONASS or GPS for ublox 7
uBlox-Center Messages
uBlox-Center Update Rate
uCenter Manual
Windows-Linux-Apple-Android
Connect Bluetooth at the Computer (Windows)
How can I setup the Bluetooth connection?
You will need an integrated Bluetooth receiver or a Bluetooth USB stick for your computer, Notebook, Netbook, Tablett, etc.
1.Turn on the GNSS receiver.
2.Start the Bluetooth software. Select the Bluetooth settings (blue icon in your windows taskbar) and scan the Bluetooth environment for devices.
3.Select your GNSS receiver for pairing and follow the instructions of your bluetooth software. If if applicable choose a free COM port.
4.The system will ask for a key, please enter 0000.
5.Close now the Bluetooth manager.
6.Start your mapping and navigation software or a test software like "Test and Check with GPS information" and select the previously configured COM port and the right baud rate of the device.
1.Turn on the GNSS receiver.
2.Start the Bluetooth software. Select the Bluetooth settings (blue icon in your windows taskbar) and scan the Bluetooth environment for devices.
3.Select your GNSS receiver for pairing and follow the instructions of your bluetooth software. If if applicable choose a free COM port.
4.The system will ask for a key, please enter 0000.
5.Close now the Bluetooth manager.
6.Start your mapping and navigation software or a test software like "Test and Check with GPS information" and select the previously configured COM port and the right baud rate of the device.