FAQ
Bluetooth
Bluetooth Compatibility
Connect Bluetooth at the Computer (Windows)
Connect Bluetooth at the Handy, Tablet, etc. (Android)
Connect Bluetooth by Windows CE/Apple and the mobile phone
Driver and Bluetooth
Cable and Accessories
Firmware
GNSS Receiver
Interface and Driver
News
Software
Flight Planner 5.6 von ifos GmbH
Google Earth Pro
GPS-Information (Test and Check)
MTK MiniGPS (Test und Check)
NL-121X oder 122X Sportuhren
NL-456DL und NL-457DL mit TimeMachineX
SIRFDemo (GPS protocols)
uCenter
Compatibility Mode for ublox
uBlox and Change the Baudrate
uBlox-Center A-GPS
ublox-Center Compatibility Mode since ublox 6
uBlox-Center Egnos
uBlox-Center GLONASS or GPS for ublox 7
uBlox-Center Messages
uBlox-Center Update Rate
uCenter Manual
Windows-Linux-Apple-Android
SIRFDemo (GPS protocols)
The SirfDemo program allows you to configure the GPS receiver which containing a SIRF chip. So you can for example change the data rate or switch protocols on or off. The settings require more in-depth expertise on GPS-System and can disable the Receiver if it is incorrectly configured .
Download:
1. Fist install the software "Sirf Demo".
Download:
1. Fist install the software "Sirf Demo".
2. Start "Sirf Demo", choose the right COM-Port and a Baudrate of 4800 Baud. Then click the "OK" button.
3. Start the connection to the receiver and check the function, looks like in the following screen shot.
4. The next two steps are very important. Open the menu "Action" and "Switch to SIRF protocol". Now the device is in a binary mode.
5. Open the menu "Action" and then switch back to NMEA, "Switch to NMEA Protocol".... After that action you can change the protocols and the some other paramter.
Be sure that this picture is like your configuration if you like to activate the GLL sentence. Then click "Send". Now the receiver sends also GLL.