FAQ
Bluetooth
Bluetooth Compatibility
Connect Bluetooth at the Computer (Windows)
Connect Bluetooth at the Handy, Tablet, etc. (Android)
Connect Bluetooth by Windows CE/Apple and the mobile phone
Driver and Bluetooth
Cable and Accessories
Firmware
GNSS Receiver
Interface and Driver
News
Software
Flight Planner 5.6 von ifos GmbH
Google Earth Pro
GPS-Information (Test and Check)
MTK MiniGPS (Test und Check)
NL-121X oder 122X Sportuhren
NL-456DL und NL-457DL mit TimeMachineX
SIRFDemo (GPS protocols)
uCenter
Compatibility Mode for ublox
uBlox and Change the Baudrate
uBlox-Center A-GPS
ublox-Center Compatibility Mode since ublox 6
uBlox-Center Egnos
uBlox-Center GLONASS or GPS for ublox 7
uBlox-Center Messages
uBlox-Center Update Rate
uCenter Manual
Windows-Linux-Apple-Android
Linux
Does the GNSS receiver works with Linux?
YES
The devices with a Prolific chip (since kernel 2.4) are automatically supported and are available as
/dev/ttyUSB1 or similar available in the systems.
The devices with uBlox chip (since kernel 2.4) are automatically supported and are available as
/dev/ttyACM0 or similar available in the systems.
Note:
GNSS applications can reprogram the GNSS receiver automatically without warning and destroy it or make it unusable for other systems. In this case, the devices can not be repaired or replaced by Navilock.
YES
The devices with a Prolific chip (since kernel 2.4) are automatically supported and are available as
/dev/ttyUSB1 or similar available in the systems.
The devices with uBlox chip (since kernel 2.4) are automatically supported and are available as
/dev/ttyACM0 or similar available in the systems.
Note:
GNSS applications can reprogram the GNSS receiver automatically without warning and destroy it or make it unusable for other systems. In this case, the devices can not be repaired or replaced by Navilock.